STR M8-12

Power

输入电源

Power rated: 2.5KW

额定功率：2.5KW

voltage

电压

Voltage rated:  AC208-240V 50/60HZ

额定电压： AC208-240V 50/60HZ

Working Temperature

工作温度

Max. Temperature: 1200 °C

设计温度：1200℃

Operating temperature: ≤1100℃

工作温度：≤1100℃

Recommended heating Rate: 15-40℃ /min

推荐升温速率：5-40℃/分钟

Temperature Controll

控温方式

Automatic PID control and self-tuning adjustment

全自动PID控制和自整定调节

30 programmable segments for precise thermal processing

人工智能化30段可编程控制

Built-in protection for the over-heated and broken thermocouple

超温和断偶报警功能

Thermocouple

测温元件

Type K thermocouple

K型热电偶

Temperature Accuracy

控温精度

+/- 1℃

Dimensions

尺寸

Chamber size: 7.2L (w200xd300xh120mm)

腔炉膛尺寸：7.2L（w200xd300xh120mm）

Boundary dimension: 435x550x540mm

外管尺寸：≈440x550x550mm

Package size：580x620x750mm

包装尺寸：580x620x750mm

Furnace Construction

炉子结构

High purity fibrous alumina insulation for maximum energy saving - 30% less power consumption than other brands

采用高纯氧化铝作为炉膛材料，最大程度减小能量损失，比一般加热炉减少30%能耗

The furnace body adopts a double-layer structure, and the air duct is set in the middle to ensure that the surface temperature of the furnace body and the temperature of the electrical control part do not exceed 60℃

炉体采用双层结构，中间设置风道，保证炉体表面温度和电气控制部分温度不超过60℃

The use of spring door buckle, a good solution to the equipment bore due to high temperature shrinkage gap

采用弹簧门扣，很好的解决了设备内膛因高温产生的收缩缝隙

Equipped with inspection window on the front,convenient to to observe the situation inside the chamber

前门设有观察窗，便于观察腔体内部情形

Heating Elements

加热元件

Resistance wire

高温电阻丝

Net Weight

净重

60kg

Rough weight

毛重

80kg

Warranty

质保

Warranty period: one year (except fragile and consumable parts)

质保周期：一年（易损易耗件除外）

Caution

警示

The equipment is not sealed, and can not be put into toxic, harmful, inflammable and explosive gas. Can add the inlet port to pass through the inert gas or oxygen

此设备腔体不密封，不能通入有毒有害，易燃易爆气体。可以加装进气接头，通惰性气体或者氧气

Small cracks may appear on the surface of the refractory ceramics over extended use. This is a normal occurrence and the cracks may be repaired with alumina coating

在使用过程中炉膛表面可能出现细小裂纹。这是正常情况，裂纹可以用氧化铝涂层修复

You shall place the sample in to a crucible.  Never place sample on the chamber bottom directly

建议将样品放进坩埚里。不要把样品直接放在腔底

Standard configuration

标准配置

Cushion brick 1 piece, high temperature gloves 1 pair, crucible pliers 1 piece

垫砖1块、高温手套1副、坩埚钳1把